Problems that must be paid attention to in the application of nylon cable ties:
1. When applying nylon cable ties
The circle diameter of the object to be bound should be lower than the circle diameter of the nylon cable tie, and the remaining length of the belt body should be 5-8cm after it is fastened. Nylon cable ties can maintain high-quality mechanical equipment characteristics and heat embrittlement resistance in the general temperature range (-40~120℃)
2. Nylon cable ties are applied in natural environment
Nylon cable ties can maintain high-quality physical properties in a humid natural environment. Nylon cable ties absorb water, increase environmental humidity (moisture content), and have higher elongation and impact compressive strength. reduce slowly. Note that in the case of application, do not place the cable tie under direct sunlight, otherwise it will easily cause great harm to the characteristics of the product. If the natural environment at work must be in the sun for a long time, then it is recommended to choose anti-aging cable ties products, or to eliminate pyrogens.
3. When controlling the application of nylon cable ties
The application of the shrinkage tensile strength should not exceed the tensile strength of the nylon cable tie, otherwise there will be a rupture.
4. nylon cable ties have excellent edge
The rated temperature of electrical equipment is lower than 105 degrees without harming its characteristics, and the flame retardant grade is 94V-2 measured by UL.
5. the storage environment of nylon cable ties
Ideally, it should be kept at around 23 degrees Celsius, and the ambient humidity should be controlled at around 50%, which must be paid more attention to.
Although there are very few areas that must be paid attention to in the application of nylon cable ties, the areas that must be paid attention cannot be ignored, otherwise, it is very easy to cause problems with nylon cable ties. Here, I would like to remind many friends that when applying nylon cable ties, remember not to exceed the tensile strength of nylon cable ties.